Weno Networks UNIVERSAL 48V WALL PLUG POE INJECTOR FOR MOST CISCO / POLYCOM / AASTRA/ MITEL/SHORETEL PHONES

Power standard PoE Cisco, Aastra, Polycom, Mitel, other IP phones; Wireless Access Points and Client Devices; Security Camera Systems
Remotely Power Equipment thru CAT5 Cable up to 100m; Compact size – Convenient Wall Plug Design
OUTPUT: 48V .5A IEEE 802.3af Standard Power over Ethernet. Please do not order if your unit requires more than 500 MilliAmps or .5 AMP

Description

Buyer beware: There are units sold on AMAZON by other resellers than WENO NETWORKS. These units aren’t manufactured by us and do not bare our logo, part number, neither are the covered by our warranty. The U48V1A-POE-WP-NA Power Over Ethernet Power Sources are a low cost Passive POE inserter/injector compatible with all kinds of passive POE powered devices. Most of our customers use these units to power their standard PoE Cisco, Aastra and Polycom phones. ( Please do not order if your unit requires more than 500 MilliAmps or .5 AMP ) They’re midspan devices, because of this there’s a data-in port and an output port with data and power. The RJ45 connectors are shielded in order that the CAT5 cable shielding path isn’t interrupted between the data source (computer, router or switch) and the device being supplied with POE power. The small size and convenient wall plug design helps keep the installation simple and clean. The low cost makes them very affordable. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet). The units are autoranging in order that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the POE output. They have got more than a few protections for short circuit, overload and overvoltage. Features -Remotely Power Equipment thru CAT5 Cable up to 100m -Autoranging Switching Power Supply: 100-240VAC -Short Circuit, Over Current and Over Voltage Protection -Powerful 24W Passive POE Output -CE Certified, Meets RoHS Requirements -Compact size – Convenient Wall Plug Design *this item might not be compatible with some older Cisco Models that use Pre-Standard power and not the IEEE 802.3af Standard
Power standard PoE Cisco, Aastra, Polycom, Mitel, other IP phones; Wireless Access Points and Client Devices; Security Camera Systems
Remotely Power Equipment thru CAT5 Cable up to 100m; Compact size – Convenient Wall Plug Design
OUTPUT: 48V .5A IEEE 802.3af Standard Power over Ethernet. Please do not order if your unit requires more than 500 MilliAmps or .5 AMP
Please do not order if your phone or device does not run on 48v standard PoE power
*this item might not be compatible with some older Cisco Models that use Pre-Standard power and not the IEEE 802.3af Standard

Reviews

There are no reviews yet.

Be the first to review “Weno Networks UNIVERSAL 48V WALL PLUG POE INJECTOR FOR MOST CISCO / POLYCOM / AASTRA/ MITEL/SHORETEL PHONES”

Your email address will not be published. Required fields are marked *